Pfaff Square feet set
The Square Feet Set contains two feet, one that will give a 1/4 seam allowance and one with a 1/2 seam allowance. These feet are designed to aid in achieving straight seams when you are piecing on the quilt frame.
TO ATTACH THE SQUARE FOOT
If another presser foot is on the mount, use the 2.5mm hex wrench to loosen the mounting screw far enough that you can slide the foot off of the mount.
Slide the chosen foot onto the mount. The opening on the side of the foot lines up with the mount's screw hole. Push the Square Foot up as far as it will go.
Ensure the foot is centered over the hole in the needle plate and that the needle is centered in the foot. Then fully tighten the screw with the 2.5mm hex wrench.
Compatible with PFAFF powerquilter 1600 and 1650